The Universal Guitar Fret Slotter

At last, a fret slotting jig that Guitar Makers have been waiting for. A Luthier'sdream! You can actually cut any scale length on any finger board for a fretted instrument. Many products are already available on the guitar suppliers market for cutting accurate fret positions but not like the Universal Fret Slotter.

If you are a jobbing Luthier who gets a wide range of commissions from guitars to banjos, then this is the guitar tool for you.

Ever been frustrated with the existing fret slot jig when you have to buy a new hole mounting plate for a one-off job? You probably turned down the job because costs were prohibitive! with the new Universal Fret Slotter you don't have to turn down any more jobs. You'll never have to buy another hole plate again! In fact, you can even make your own accurate hole plates with the accessories available for the Universal Fret Slotter.

This is great - even if you only use a few standard scale lengths - since, when your hole plates wear and you begin to lose accuracy, or just make your own new ones, maintaining high quality on your your fret positions.

Ever wanted to design your own scale lengths? Now you can! From a small 12 inch mandolin to a mighty 35 inch scale length six string bass guitar. Literally any scale length you can think of or invent in between! Ask your guitar supplies merchant if they are stocking the new Universal Fret Slotter or enquire direct to Necx Products.

By using the free fret calculator, a chart is generated to give the positions. You choose the appropriate column; whether you go from a zero fret or the nut.

The accuracy is astonishing: the device has the ability to place the cutting blade well within 0.004 inch (0.1mm) of position. This is a great advantage to what already exists on the market:

1. You don’t need to purchase a new hole plate every time you need a new scale length.
2. You can offer your own fret slotting service to other Luthiers
3. Accuracy is maintained because there is no hole plate wear since the device needs no hole plates! Note: current hole plate devices only offer 0.005 inch (0.127mm) positional accuracy.
4. Not only can the slotter be used for cutting accurate finger boards, it can also be used for cutting accurate, evenly spaced linings for acoustic instruments.
5. If you like using a hole plate system because you’ve got a production run to do, then a special hardened steel drill bush and locator pin kit can be purchased so that you can drill your own custom hole plates!

And the price? £290.00 sterling! (Plus Post & Packing)

Hard to believe? This is how it works.